Marine Engineer Job at Cruz Construction, United States

  • Cruz Construction
  • United States

Job Description

Marine Engineer

Operates and maintains marine engines and mechanical equipment such as diesel engines, air compressors, generators, motors, turbines, boilers, etc. to provide propulsion and utilities for an assigned vessel by performing the following duties.

Essential Functions:

  • Adhere to the QSEMS (Quality, Safety, and Environmental Management System) including the Quality Assurance Manual (QAM) and the Operating Procedures Manual (OPM)
  • Operate and maintain marine engines and mechanical equipment, such as: diesel engines; air compressors; generators; motors; etc. and to provide propulsion and utilities for an assigned vessel.
  • Read meters and gauges or automatic recording devices at specified intervals to verify operating conditions.
  • Record data, such as: temperature of equipment; hours of operation; fuel consumed; temperature or pressure; water levels; voltage load and generator balance; etc.
  • Adjust manual controls or overrides automatic controls to bring equipment into recommended or prescribed operating ranges; switch to backup equipment or systems; or, to shut down equipment.
  • Visually inspect equipment at periodic intervals to detect malfunctions or need for repair, adjustment or lubrication.
  • Maintain equipment by: tightening fittings; repacking bearings; replacing packing glands; gaskets; valves; recorders; gauges; and, cleaning or replacing components.
  • Maintain oils, fuels and lubricate equipment and tug.
  • Perform many of the boat wide general maintenance and upkeep duties required to keep the assigned vessel in good working order and condition.
  • May record operation and maintenance actions taken during shift in operator's logbook.

Other Tasks:

  • Perform many of the duties of other positions assigned to the vessel.
  • Perform all of the duties assigned to the deckhand position.
  • Perform other general boat operational duties as assigned.

Supervisory Responsibilities: None

Qualifications:

To perform this job successfully, an individual must be able to perform each essential function and preferably can also perform other tasks satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education and/or Experience:

  • Minimum: Six months of direct related experience and/or training, or equivalent combination of education and experience.
  • Merchant Mariner Credential
  • TWIC
  • High School Diploma/GED
  • Valid Drivers License

Preferred:

  • Designated Duty Engineer 4000 HP
  • Qualified Member of the Engineering Department (QMED)
  • Basic Safety Training (BST)
  • First Aid/CPR
  • AB Special
  • FMCSA Medical Card

Skills, Knowledge and Abilities:

  • Knowledge of and ability to use Internet software and the ability to use Microsoft Office and email
  • Knowledge of general machines and tools, which include: anchor lines, anchor rollers, depth gauges, hoists, marine signaling systems, and winches.
  • Knowledge of the practical application of engineering science and technology. This includes applying principals, techniques, procedures, and equipment.
  • Skill in controlling operations of equipment or systems on the vessel.
  • Skill in problem solving and reacting quickly with rapidly changing situations.
  • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
  • Ability to apply common sense understanding to carry out instruction furnished in written, oral, or diagram form.
  • Ability to read and understand simple instructions, short correspondence and memos
  • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.

Physical Demands

  • The physical demands listed below are representative of those required to successfully perform the essential functions of this position. Frequency is defined as follows:
  • NP = Not Present
  • Rare = 1–10% of the workday
  • Occasional = 11–33% of the workday
  • Frequent = 34–66% of the workday
  • Constant = 67–100% of the workday

Activity Requirements

  • Sitting – Frequent
  • Standing – Frequent
  • Walking – Frequent
  • Reaching (Overhead, Straight Ahead, Downward) – Frequent
  • Bending/Stooping – Frequent
  • Crouching – Frequent
  • Kneeling – Frequent
  • Crawling – Frequent
  • Climbing (onto equipment) – Frequent
  • Twisting (including wrist) – Frequent
  • Handling – Frequent
  • Finger Dexterity– Occasional
  • Feeling – Occasionally
  • Talking – Frequent
  • Hearing – Frequent
  • Balancing – Frequent
  • Operating Foot Controls – Occasionally

Lifting/Carrying/Pushing/Pulling Requirements

  • Frequent: Up to 100 lbs.
  • Occasional: Up to 100 lbs.

Working Conditions:

Environmental Conditions & Inherent Hazards:

  • Weather Exposure: Work may involve exposure to inclement weather, including rain, snow, ice, and arctic temperatures is rare.
  • Heat: Occasional exposure to hot diesel engines and hoses during equipment lubrication.
  • Noise: Moderate to high noise levels from equipment and operations.
  • Vibration: Occasional exposure to normal equipment vibration.
  • Atmospheric Conditions: Possible exposure to diesel fumes, dust, and other airborne particles.

Hazards:

  • Moving Mechanical Parts: Exposure to engine components, drive trains/tracks, and other mechanical parts.
  • Electrical: Potential exposure to electric shock from generator sets and other site equipment.
  • Work at Heights: Occasionally exposed to situations which require fall protection.
  • Radiant Energy: Active Radar, rarely exposed.
  • Fuel & Chemicals: Exposure to diesel fuel, petroleum distillates, and related hazards.
  • General Construction Hazards: Must remain aware of potential risks associated with heavy equipment and construction environments.

EEO Statement:

Cruz Construction, Inc. is an Equal Opportunity Employer. We make all employment decisions without regard to race, color, religion, sex, national origin, ancestry, age, disability, genetic information, marital status, citizenship, pregnancy, sexual orientation, gender identity, veteran status, other protected activities, or any other characteristic protected by federal, state or local law. This employer participates in E-Verify. Este Empleador Participa en E-Verify.

This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.

Job Tags

Work at office, Local area, Remote work, Shift work

Similar Jobs

D1 Training

Strength and Conditioning Coach Job at D1 Training

 ...the goal, we help you get there and D1 Coaches are the catalysts for our fulfillment of...  ...industry-leading educational advice on strength, speed, and nutritionTeaching proper form...  ...Minimum of 1 year of strength & conditioning-related experience in group, team, or personal... 

Apex Systems

Systems Analyst 1 Job at Apex Systems

Systems Analyst 1Job#: 3052822Job Description:Systems Analyst 1Location: Austin, Texas (Onsite)Role OverviewThis organization is seeking...  ....ITIL Foundations or ITIL Practitioners Certification.Everforth Apex is a world-class IT services company that serves thousands of clients... 

ClinDCast LLC

EPIC Project Manager Job at ClinDCast LLC

 ...Epic Project ManagerWe are seeking an experienced Epic Project Manager to lead and manage the scope, schedule, and quality of EHR revenue cycle projects. The role involves coordinating with stakeholders, ensuring business engagement, troubleshooting system issues, and... 

Atlantic Coast Staffing

Cleaner/Janitor Job at Atlantic Coast Staffing

 ...We are seeking a reliable Cleaner to join our team. The ideal candidate will ensure trailers are kept clean, organized, and sanitary for onsite staff.Responsibilities Clean and sanitize designated construction site areas such as site trailers, offices, etc.Empty trash... 

Giant Eagle

Cake Decorator Job at Giant Eagle

 ...Job Summary Our Cake Decorator is a key player in making sure our pastries look and taste amazing. In addition to providing unparalleled guest service, you'll create beautiful and delicious art for our guests and provide the sweets that will be the hit of their parties...